Your current location:Home > Product > Ceramic anti-static floor

Direct laying anti-static ceramic tile

The direct laid anti-static ceramic brick is a kind of functional ceramic brick with long anti-static time and high-grade artistic decoration effect. It is a major progress in the diversification of anti-static ground materials, injecting new vitality into the anti-static industry and ceramic industry, and filling the domestic gap.
Contact number:0086-18001502971

Product Details

The direct laid anti-static ceramic brick is a kind of functional ceramic brick with long anti-static time and high-grade artistic decoration effect. It is a major progress in the diversification of anti-static ground materials, injecting new vitality into the anti-static industry and ceramic industry, and filling the domestic gap.


The direct laid anti-static ceramic tile is a new type of anti-static material, which overcomes the problems of easy aging, non wear resistance, easy pollution, poor durability and poor fire prevention of polymer materials currently used, such as epoxy and melamine, PVC anti-static coating, floor, anti-static rubber plate, etc. It overcomes the shortcomings of the above anti-static materials and is compatible with the advantages of ceramic wall and floor tiles. It has the advantages of beauty and durability, fire prevention, skid resistance, compression resistance, wear resistance, corrosion resistance, antifouling, waterproof and anti penetration, low radiation, environmental protection, sanitation and easy construction. It is a kind of functional ceramic tile with long anti-static time and high-grade artistic decoration effect.



Direct laying anti-static ceramic tile


Antistatic property


   Comparison table of electrical performance test values of anti-static ceramic tiles (measured)


     Standard technical index surface resistance 1 × 105~1 × 109 Ω volume resistance 1 × 106~1 × 109Ωcm

  Jiantao quality inspection center 1.3 × 108Ω 9 × 106Ωcm


  Ordnance industry electrostatic Testing Center 1.3 × 107Ω 2.3 × 107Ωcm


  Electrostatic quality inspection center of information department 2 × 108Ω 9 × 106Ωcm


Antistatic ceramic tile


radioactivity


According to the physical inspection and actual production control, IRA ≤ 0.6, IR ≤ 1.0, which is stricter than the class a requirements specified in the regulations and environmental protection products. The measured values are iro=0.15, ir=0.52. The standard and environmental protection product regulations are iro ≤ 1.0, IR ≤ 1.3, iro ≤ 0.9, IR ≤ 1.2 respectively.


Lead and cadmium content


   The content of soluble lead in environmental protection certified products shall not be greater than 20mg/kg,


   The content of soluble cadmium shall not be greater than 5mg/kg.


   The actual content of soluble lead and cadmium in the product was 0.58mg/kg and 0.03mg/kg respectively.


Antistatic ceramic tile


   Anti static ceramic tiles have the following advantages:


   一、Not affected by the environment, the whole body has stable anti-static performance, and the body resistance and surface resistance are less than 5 × 108Ω.


   二、Excellent heat resistance, high temperature resistance up to 1200 ℃, constant conductivity.


   三、Wear resistance, corrosion resistance, acid and alkali resistance, oil resistance, flame retardancy and anti permeability are unmatched by other materials.


   四、Ceramic texture, never aging.


   五、It is non-toxic, tasteless and radiation-free. It is a green environmental protection product.


   六、The designs and varieties can be selected at will.


   七、The dust generation is small, and it can meet the requirements of high-level clean and quiet environment when used in combination with caulking agent.


   八、The construction is convenient and suitable for use in various new and old buildings.


  The successful research and development of anti-static ceramic tiles will completely solve the problems that perplex the world. With its stable anti-static performance and excellent quality, it will regulate the whole anti-static market.

It is widely used in electronic computer room, satellite ground station room, radio control room, TV transmitting station control room, microwave communication station room, program-controlled switching room, clean workshop, electronic instrument factory assembly workshop, confidential optical instrument manufacturing workshop, hospitals, schools and other places with static electricity prevention requirements, large and medium-sized computer rooms, communication rooms represented by switches, military and economic controlled by computers, National security, aviation, aerospace and transportation.